MIL-PRF-15733/62D
Life: In accordance with MIL-PRF-15733 and method 108, MIL-STD-202, test condition D, except that following the
test, insulation resistance shall not be less than 1 gigohm.
Marking: Filters shall not be marked. Full marking, in accordance with MIL-PRF-15733 shall be marked on the unit
package.
Part or identifying number (PIN): M15733/62 (dash number from table II).
Supersession data: Filters in this specification supersedes filters in MIL-PRF-15733/37(USAF) and MIL-PRF-
15733/50(USAF) as follows:
PIN
Superseded
M15733/62-
Part number
0001
M15733/37-0001
0002
M15733/50-0001
0003
M15733/50-0002
0004
M15733/50-0004
VERIFICATION:
Conformance inspection: In accordance with MIL-PRF-15733, except as follows:
Group A: In accordance with MIL-PRF-15733, except that prior to the group A inspection 100 percent of each
lot of filters shall be subjected to the voltage conditioning test. If the total rejects from any particular lot exceed
10 percent that entire lot shall be rejected.
NOTES:
Referenced documents. In addition to MIL-PRF-15733, this specification sheet references the following documents:
MIL-STD-202
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the
previous issue due to the extensiveness of the changes.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
DLA - CC
(Project 5915-0431)
Review activities:
Army - AT, AV, MI
Navy - AS, MC, OS
Air Force - 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at www.dodssp.daps.mil.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business