MIL-PRF-15733/62D
Barometric pressure (reduced): In accordance with MIL-PRF-15733. The following exceptions shall apply:
test condition D (100,000 ft.) for -0001
test condition E (150,000 ft.) for -0002 and -0005
test condition B (50,000 ft.) for -0003 and -0004
Dielectric withstanding voltage: In accordance with initial requirements, except that the test voltage shall be 1.2
times the rated dc voltage.
Insulation resistance: In accordance with MIL-PRF-15733. Minimum insulation resistance measured between both
terminals connected together and the case shall be as follows:
At 125°C
At 25°C
0001, 0002, and 0005
10 gigohms
1 gigohm
0003 and 0004
5 gigohms
500 megohms
Voltage drop: In accordance with MIL-PRF-15733. Maximum voltage drop shall be 0.1 volt.
Insertion loss: In accordance with MIL-PRF-15733 at 25°C and temperature extremes (see table II).
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Measurements at 25°C after test: Insulation resistance only shall be measured and shall meet initial
requirements.
Terminal strength: In accordance with MIL-PRF-15733 and method 211, MIL-STD-202: test condition A.
Applied force: 5 pounds.
Resistance to solvents: Not applicable.
Salt atmosphere (corrosion): Not applicable.
Thermal shock and immersion: Not applicable.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202: test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202: test condition D.
Moisture resistance: In accordance with MIL-PRF-15733. The following exceptions shall apply:
Initial measurements and load voltage: Not applicable.
Polarization voltage: Not applicable.
Measurements after 24 hours drying period, at a temperature not to exceed 85°C, and a relative humidity of 50
percent:
Dielectric withstanding voltage with 90 percent of initial voltage applied for 5 ± 1 seconds.
Insulation resistance shall be not less than 1 gigohm.
Insertion loss shall meet the initial requirements.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business