MIL-PRF-15733/62D
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1 and table I.
Weight:
Dash number 0001
-
1.2 grams maximum
Dash numbers 0002, 0003, and 0004 -
.7 grams maximum.
Dash number 0005
-
.9 grams maximum.
Case: Not applicable (metallic mounting eyelet termination).
Terminals, mounting termination: Solderable. Pure tin is prohibited as an undercoat and as a final finish.
Operating temperature range: -55°C to +125°C.
Rated voltage: See table II.
Rated current: 10 amperes, dc or ac (rms).
Voltage conditioning (conformance inspection only): The test shall be performed as follows:
Test temperature: 125°C + 4°C, -0°C.
Test voltage: 200 percent of the rated dc voltage. Charging current shall not exceed 50 mA.
Points of applications of test voltage: Between each terminal and case.
Duration of exposure to test voltage: 100 ±4 hours.
After completion of exposure, and while filters are established at 125°C, insulation resistance shall be measured.
Filters shall then be stabilized at 25°C, and insulation resistance shall be measured. A reject shall be defined as
a filter whose insulation resistance does not meet initial requirements when measured at 125°C and 25°C.
Seal: Not applicable.
Capacitance to ground: In accordance with MIL-PRF-15733. Minimum capacitance shall be as specified in table II.
Temperature rise: In accordance with MIL-PRF-15733. Temperature rise shall be 25°C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following exceptions shall apply:
The test voltage shall be as follows and shall be applied for 1 to 5 seconds:
0001 and 0005
-
1,000 V dc
0002
-
600 V dc
0003
-
300 V dc
0004
-
200 V dc
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business