MIL-PRF-15733/41H
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Weight: See figure 1.
Case: Metal.
Case and mounting hardware finish: In accordance with MIL-PRF-15733. Pure tin is prohibited as an underplate
and final finish (see MIL-PRF-15733).
Terminals: In accordance with MIL-PRF-15733. Pure tin is prohibited as an underplate and as a final finish (see
MIL-PRF-15733).
Solderable (dash numbers 0001, and 0004 through 0006).
Radial tapped permanent stud (dash numbers 0002 and 0003).
Operating temperature range: -55°C to +125°C.
Rated voltage: See table I.
Rated current: See table I.
Insertion loss (at +25°C): In accordance with MIL-PRF-15733 and table I.
(at -55°C and +125°C): Insertion loss shall be as specified in table I except that a degradation
of 2 dB from the value specified in table I shall be allowed up to 10 MHz.
Voltage conditioning (conformance inspection only): 100 percent of each lot of filters shall be subjected to the
voltage conditioning test. The test shall be conducted prior to the group A inspection of MIL-PRF-15733, as
follows:
Test temperature: 125°C ±3°C.
Test voltage: 120 percent of the rated ac voltage. 140 percent of the rated dc voltage (for -0004). Charging
current shall not exceed 50 mA.
Test duration: 100 ±4 hours (dash numbers 0001, 0005, and 0006.
50 +4, -0 hours (dash numbers 0002, 0003, and 0004).
After completion of exposure, and while filters are stabilized at +125°C, the insulation resistance shall be
measured. Filters shall then be stabilized at +25°C and insulation resistance shall be measured. A reject shall be
defined as a filter whose insulation resistance does not meet the initial requirements when measured at +125°C
and at +25°C. If the total rejects from any particular lot exceed 10 percent, the entire lot shall be rejected.
Seal: In accordance with MIL-PRF-15733.
Capacitance to ground (applicable to -0001 only): In accordance with MIL-PRF-15733.
Measured capacitance: Between 0.72 and 1.17 µF.
Temperature rise: In accordance with MIL-PRF-15733. Temperature rise shall be 25°C, maximum.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business