MIL-PRF-15733/44F
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Weight: See figure 1.
Case and hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solderable.
Operating temperature range: -55°C to +125°C.
Rated voltage: 125 V dc or 85 V rms, dc to 424 Hz.
Rated current: 15 amperes.
Insertion loss: In accordance with MIL-PRF-15733 and table I.
Voltage conditioning: Applicable to conformance inspection only. 100 percent of each lot of filters shall
be subjected to the voltage conditioning test. The test shall be conducted prior to the group A inspection of
MIL-PRF-15733, as follows:
Test temperature: 125°C +4°C, -0°C.
Test voltage: 200 percent of rated dc voltage. Charging current shall not exceed 50 mA.
Points of application of test voltage: Between each terminal and the case.
Duration of exposure to test voltage: 100 ±4 hours.
After completion of exposure, and while filters are stabilized at +125°C, insulation resistance shall be
measured. Filters shall then be stabilized at +25°C, and insulation resistance shall be measured.
A reject shall be defined as a filter whose insulation resistance does not meet initial requirements when
measured at the +125°C and +25°C conditions as specified in this test. If the total rejects from any particular
lot exceeds 10 percent, that entire lot shall be rejected.
Thermal shock and immersion: Not applicable.
Moisture resistance: Not applicable.
Capacitance to ground: In accordance with MIL-PRF-15733. Measured capacitance shall be as follows:
Dash no.
Dissipation factor
Measured capacitance
-0 percent, +100 percent
-0001
3.0 percent max
3,000 pF
-0002
3.0 percent max
1,500 pF
-0003
3.0 percent max
65 pF
Temperature rise: 25°C, maximum.
Insulation resistance: In accordance with MIL-PRF-15733. The insulation resistance shall be 500 megohms
minimum at +25°C and 100 megohms minimum at +125°C.
Voltage drop: In accordance with MIL-PRF-15733 and table I.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business