MIL-PRF-15733/63A
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Weight: .1092 pounds (49.5 grams), maximum.
Case: Metal. Pure tin finish is prohibited.
Terminals: Solderable. Pure tin finish is prohibited.
Operating temperature range: -55°C to +125°C.
Rated voltage: 350 V dc or 250 V rms, to 400 Hz over the operating temperature range.
Rated current: 10 amperes, dc or ac (rms).
Seal: Not applicable.
Capacitance to ground: In accordance with MIL-PRF-15733.
Measured capacitance shall be at least 5,000 pF.
Temperature rise: 25°C maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following detail shall apply:
Test voltage applied for 1 to 5 seconds: 1,050 V dc.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 and Method 105, MIL-STD-202; test
condition D.
Insulation resistance: In accordance with MIL-PRF-15733. The insulation resistance measured at 25°C between
either terminal and the case shall be at least 10 Gohms.
Voltage drop: Not applicable.
Insertion loss: In accordance with MIL-PRF-15733 and table I.
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Measurements at +25°C after test:
Insulation resistance only shall be measured and shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A.
Applied force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition B.
Thermal shock and immersion: In accordance with MIL-PRF-15733. The following exception shall apply:
Measurements after final cycle:
Insulation resistance shall be not less than 1 Gohm.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business