MIL-PRF-15733/57D
Voltage drop: .18 volt, maximum.
Overload: In accordance with MIL-PRF-15733. After the filter has returned to room temperature, the insulation
resistance and voltage drop measurements shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and method 211, MIL-STD-202; test condition A (pull).
Force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and method 101, MIL-STD-202; test condition A.
Shock (specified pulse): In accordance with MIL-PRF-15733 and method 213, MIL-STD-202; test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and method 204, MIL-STD-202; test condition B
(15 g).
Part or Identifying Number (PIN): M15733/57-0001.
NOTES:
*
Referenced documents: In addition to MIL-PRF-15733, this specification sheet references the following
documents:
*
Changes from previous issue: The margins of this specification sheet are marked with asterisks to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to
evaluate the requirements of this document based on the entire content irrespective of the marginal notationsd
relationship to the last previous issue.
Custodians:
Preparing activity:
Navy - EC
DLA - CC
Air Force - 85
DLA CC
(Project 5915-2009-002)
*
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business