MIL-PRF-15733/55F
Temperature rise: 25°C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following details and exceptions shall
apply:
Test voltage - shall be 2 times rated dc voltage applied between either terminal and case. The test voltage
shall be applied and discharged through a resistance of at least 1 ohm per volt (0001 and 0002 only).
Barometric pressure (reduced): In accordance with MIL-PRF-15733. The following exception shall apply:
Test altitude: 80,000 feet (0.83 inch of mercury) for 0001 and 0002.
Insulation resistance: In accordance with MIL-PRF-15733. Insulation resistance shall be at least 550 megohms for
-0001 and -0002 and shall be 1,000 megohm-microfarads minimum for the -0003.
Voltage drop: 1.0 V rms, maximum (-0001 and -0002) and .5 V dc, Max (-0003).
Insertion loss: In accordance with MIL-PRF-15733 and tables II and III.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A (pull). The
following details shall apply:
Applied force: 5 pounds. The force shall be applied in a direction parallel to the longitudinal axis of the filter.
Slight deformation at the solder tab shall be allowable, provided no cracks, fractures or other damage to the
terminal result from this test.
Flashpoint of impregnant or potting compound: In accordance with MIL-PRF-15733.
Minimum allowable flashpoint shall be +145°C.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202, test condition A,
(-0001 and -0002); test condition B (-0003).
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202; test condition I. The
following details and exceptions shall apply:
Mounting: Filters shall be rigidly mounted by the body.
Insertion loss test: Not applicable.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202; test condition B.
The following exception shall apply:
Electrical current load shall not be applied to filters during the vibration test.
Life: In accordance with MIL-PRF-15733 and Method 108, MIL-STD-202; test condition B. The following exception
shall apply:
Test current: 5 amperes, rms (0001 and 0002) and 2 amperes (0003) at 400 Hz.
Part or Identifying number (PIN): M15733/55- (dash number from table I).
3