MIL-PRF-15733/46C
REQUIREMENTS:
Configuration and dimensions: See figure 1 and tables I and II.
Case: Metal.
Case and hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solderable.
Rated voltage: 300 V dc over the operating temperature range.
Rated current: 10 amperes, dc.
Insertion loss: In accordance with MIL-PRF-15733 and table III.
Capacitance to ground: In accordance with MIL-PRF-15733. Measured capacitance shall be at least 4,000 pF.
Temperature rise: +25°C maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following exception shall apply:
The test voltage shall be 900 V dc applied for 1.5 seconds.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 and Method 105, MIL-STD-202; test
condition D.
Insulation resistance: In accordance with MIL-PRF-15733. The insulation resistance measured at +25°C
between both terminals connected together and the case shall be at least 10,000 megohms.
Voltage drop: Not applicable.
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Insulation resistance only shall be measured and shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A.
Applied force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition B.
Thermal shock and immersion: Not applicable.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202; test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202; test condition D.
Moisture resistance: Not applicable.
Life: In accordance with MIL-PRF-15733 and Method 108, MIL-STD-202; test condition D. The following
exceptions shall apply:
Test voltage: 600 V dc.
Following the test, insulation resistance shall be 10,000 megohms.
3