MIL-PRF-15733/33D
REQUIREMENTS:
Configuration and dimensions: See figure 1 and table I.
Weight: 1.1 grams, maximum.
Case: Not applicable (metallic mounting eyelet).
Terminals: Solderable. Pure tin finish is prohibited.
Operating temperature range: -55°C to +125°C.
Rated voltage: 125 V dc or 90 V rms, to 400 Hz over the operating temperature range of -55°C to +125°C.
Rated current: 10 amperes, dc or ac (rms).
Insertion loss: In accordance with MIL-PRF-15733 and table II.
Seal: Not applicable.
Solderability: In accordance with MIL-PRF-15733 for both terminals and mounting termination.
Capacitance to ground: In accordance with MIL-PRF-15733. Measured capacitance shall be at least 1,750 pF.
Temperature rise: 25°C maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following exception shall apply:
Test voltage: 750 V dc applied for 1 to 5 seconds.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 and Method 105, MIL-STD-202; test
condition D.
Insulation resistance: In accordance with MIL-PRF-15733. Insulation resistance measured at 25°C between
either terminal and the case shall be at least 10 G ohms.
Voltage drop: Not applicable.
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Measurements at +25°C after test:
Insulation resistance only shall be measured and shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A.
Applied force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition B.
Thermal shock: Not applicable.
Immersion: Not applicable.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business