MIL-PRF-15733/26C
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
Case: Metal.
Case and mounting hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solder lug.
Operating temperature range: -55° to +125°C.
Rated voltage: 150 volts dc or 125 volts ac at 60 Hz and 400 Hz.
Rated current: See table I.
Insertion-loss In accordance with MIL-PRF-15733 and table I.
Seal: In accordance with MIL-PRF-15733.
Capacitance to ground: Not applicable.
Temperature rise: 25°C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733 except the duration of application of voltage shall
be 1 to 5 seconds.
Insulation resistance: In accordance with MIL-PRF-15733; the following exceptions and details shall apply:
Test temperature: 25°C.
Test potential: Rated dc voltage.
Insulation resistance: Shall be not less than 1,000 megohms.
Voltage drop: See table I.
Overload: In accordance with MIL-PRF-15733. After the filter has returned to room temperature, insulation
resistance and voltage drop measurements shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and method 211, MIL-STD-202; test condition A (pull).
Force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and method 101, MIL-STD-202; test condition A.
Shock (specified pulse): In accordance with MIL-PRF-15733 and method 213, MIL-STD-202; test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and method 204, MIL-STD-202; test condition D (20g).
Moisture resistance: In accordance with MIL-PRF-15733 except after the 24 hour drying period, insulation resistance
shall meet initial requirements.
Life: In accordance with MIL-PRF-15733 and method 108, MIL-STD-202, test condition D (1,000 hrs) for qualification
inspection; test condition B (250 hrs) for group C inspection.
4