MIL-F-15733/24D
REQUIREMENTS:
Case: Metal.
Case and mounting hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solder lug.
Operating temperature range: -55° to +125°C.
Rated voltage: 28 volts, dc (de-rated from 50 volts, dc at 85°C).
Rated current: See table I.
Seal: In accordance with MIL-PRF-15733.
Capacitance to ground: Not applicable.
Temperature rise: 25°C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733 except the duration of application of voltage
shall be 1 to 5 seconds.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 except use MIL-STD-202, Method 105; test
condition D (100,000 ft).
Insulation resistance: In accordance with MIL-PRF-15733 and the following:
Test temperature: 25°C.
Test potential: Rated dc voltage.
Insulation resistance: Shall be not less than 100 megohms.
Voltage drop: See table I.
Overload: In accordance with MIL-PRF-15733. After the filter has returned to room temperature, insulation
resistance and voltage drop measurements shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and MIL-STD-202, Method 211, test condition A (pull).
Force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and MIL-STD-202, Method 101; test condition B.
Shock (specified pulse): In accordance with MIL-PRF-15733 and MIL-STD-202, Method 213, test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and MIL-STD-202, Method 204, test condition D (20g).
4