MIL-F-15733/24D
Inch
mm
Inch
mm
Dimensions
.005
.13
.187
4.75
Dash number
.010
.25
.200
5.08
D
A
±.010
.015
.38
.250
6.35
maximum
.025
.63
.312
7.92
0002, 0004, 0008
.070
1.78
.385
9.78
.740
.312
0013, 0014, 0021,
.093
2.36
.740
18.80
0022
.115
2.92
.760
19.30
0003, 0007, 0017,
.165
4.19
0018
.740
.187
0006, 0015, 0016,
0023, 0024
.760
.312
0001, 0005, 0009,
.760
.187
0010, 0011, 0012,
0019, 0020
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Circuit diagram is for information only.
4. All filters shall be supplied with mounting hardware.
5. Use of style FL12 with or without shoulder is optional.
6. Terminal identification (non-symmetrical filters): The case shall be marked at the threaded end of the filter with
the symbol "C" or "L" as follows:
Circuit
Symbol
L1 - - - - - - - - - - - - - C
L2 - - - - - - - - - - - - - L
7. Optional terminal hole of .050 ±.010 X .070 ±.010 (1.27 ±0.25mm X 1.78 ±0.25 mm) may be supplied.
8. Imperfect thread or undercut optional .050 (1.27 mm) inch maximum.
9. Terminals shall be aligned within 10° of the vertical (threaded bushing flats).
FIGURE 1. Case dimensions and circuit diagrams - Continued.
2