MIL-PRF-15733/54G
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case: Metal.
Case and hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solderable. Pure tin finish is prohibited.
Operating temperature range: -55°C to +125°C.
Rated voltage: See table I.
Rated current: See table I.
DC resistance: See table I.
Seal: In accordance with MIL-PRF-15733.
Temperature rise: 25°C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733. The following exception shall apply:
Test voltage: 2.0 times rated dc voltage, applied between each terminal and ground, for a period of 1 to 5
seconds.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 and Method 105, MIL-STD-202; test
condition C (70,000 ft) for -0001 thru -0018 and test condition B (50,000 ft) for -0019.
Insulation resistance: In accordance with MIL-PRF-15733. The following detail and exception shall apply:
Test potential: Rated dc voltage.
Insulation resistance at +25ēC shall not be less than 100 megohms for -0001 thru -0016, -0018, and -0019 and
not less than 1000 megohms for -0017.
Insertion loss: In accordance with MIL-PRF-15733 and table I.
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Insulation resistance only shall be measured at +25ēC and shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202, test condition A (pull).
Applied Force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition A.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202. The following detail
applies:
Test condition A - -0001 thru 0017
Test condition I - -0018 and -0019.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business