MIL-PRF-15733/51F
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case: Not applicable (metallic mounting eyelet).
Terminals: Solderable. Pure tin finish is prohibited.
Operating temperature range: See table I.
Rated voltage: See table I.
Rated current: 10 amperes, dc or ac (rms).
Insertion loss: In accordance with MIL-PRF-15733 and table I.
Seal: Not applicable.
Capacitance to ground: In accordance with MIL-PRF-15733. Measured capacitance shall be in accordance with
table I.
Temperature rise: +25°C, maximum.
Insulation resistance: In accordance with MIL-PRF-15733. The following detail and exception shall apply:
Test potential: Rated dc voltage.
Insulation resistance measured at 25°C between either terminal and the case shall be at least 20,000
megohms.
Voltage drop: Not applicable.
Overload: In accordance with MIL-PRF-15733. The following exception shall apply:
Measurements at +25°C after test:
Insulation resistance only shall be measured and shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A.
Applied force: 5 pounds.
Salt atmosphere (corrosion): Not applicable.
Thermal shock: Not applicable.
Immersion: Not applicable.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202; test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202; test condition D.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business